Industry news

How to adjust the manipulator of injection molding machine

How to adjust the manipulator of injection molding machine
 
 
 
Comans manipulator
 
 
 
Release time: 03-1009:56
 
With the rapid development of industry 4.0, the traditional injection molding industry also gradually uses the injection molding machine manipulator to replace the manual work, so as to reduce the heavy manual labor, improve the working conditions and safety production; improve the production efficiency of the injection molding machine, stabilize the product quality, reduce the scrap rate, reduce the production cost, and enhance the competitiveness of the enterprise. In practice, we should What about debugging? The overview of Guangdong comans manipulator manufacturers is as follows:
 
 
 
 
Injection molding machine manipulator
 
First of all, you should turn off the air pressure and adjust the position manually to prevent damage to the pattern and manipulator;
 
 
 
Secondly, first adjust the mode, that is to say, after suction or clamping, you can turn on the air pressure and run it manually once. After that, you can adjust the time, confirm that you can turn it on again and check the function of the alarm sensor. After that, you can produce it. Debugging the injection molding machine manipulator is divided into installation debugging and production speed debugging, and the speed can be slowed down in the installation, as long as the speed is adjusted. OK, it's different in production. You need your injection machine manipulator to cooperate with the injection machine debugging.
 
 
 
 
Injection molding machine manipulator
 
The manipulator speed of injection molding machine is mostly controlled by air pressure (out of mold release action: main arm down, main arm forward, main arm clamped, main arm backward, main arm up, body turning, main arm down, main arm clamped, main arm up, body rotating, main arm reset, etc.) these are all actions of injection molding machine manipulator to adjust time.
 
 
 
The above is a brief overview of how to debug the injection molding machine manipulator by comans manipulator manufacturer. I hope it can help you. Thank you!