Variable Pump Energy Saving

550ton Variable Pump Energy Saving Injection Moulding Machin

550ton Variable Pump Energy Saving Injection Moulding Machin

Servo Energy Saving Injection Molding Machine

Servo energy saving injection molding machine output power changes with the loading changing. There's no extra waste of power. The motor doesn't work while cooling, electricity consumption is 0. As compared with the tradition injection molding machine, the servo machine can save electricity 20%-80% that brings you excellent profit.
-Excellent energy saving

As compared with the traditional fixed pump injection molding machine, it saves energy 20%-80% under the same working condition.
-Excellent injection molding stability

The pressure and flow of servo drive system applies closed-loop control, as compared with the traditional injection molding machine, it greatly increases repeatability precision of injection molding.
-Fast response

Fast response servo drive, the start time faster than that of the traditional injection molding machine by 50%.
-Environmental friendly

The complete machine runs under low noisy, low speed operation and quite.
-Constant oil temperature

The servo motor output hydraulic oil according to proportion to avoid extra heat. Even the hydraulic oil need not to be cooled to realize excellent water saving.



550ton Variable Pump Energy Saving Injection Moulding Machine
550ton Variable Pump Energy Saving Injection Moulding Machine
550ton Variable Pump Energy Saving Injection Moulding Machine550ton Variable Pump Energy Saving Injection Moulding Machine550ton Variable Pump Energy Saving Injection Moulding Machine






Machine Information

550ton Variable Pump Energy Saving Injection Moulding Machine



The machine advantages:


1.High rigidity template with template's small template deformation and pull rod's long service life can ensure the performance of die assembly.

2.The gear mold regulation unit can regulate mold precisely and with good synchronism.

3.The clamping support guide rail uses joist steel structure with high rigidity in order to lower the deformation of the rack.

4. The toggle structure optimized and designed with the computer program, cooperating with the regulation of 4 stages and flow during opening and clamping mold of the controller, in order to achieve exceptionally stable and rapid clamping.

5. Rotary product blanking bucket can adapt to the workshops and products can be taken out from different places.

6.The differential motion clamping unit can improve the mold transferring speed and productivity substantially.

7.Ejector pin adjustable uni.

Get the latest price? We'll respond as soon as possible(within 12 hours)